- Solar Panels
- Multi-story Windows
- Cars & Vans
- And much more
1. Take the brush linker. Use M6 screwdriver to install the M6 screws to the brush plate in sequence, as shown.
2. Connect the short water pipe to the copper connector of the brush head in turn and firmly link it firmly，as shown.
3.Pass the water pipe from the rear hole to the head, and then use the M4 seven selfdriver to pull the water pipe out of the water pipe hole in the head.
NOTICE: WHEN RUNNING THROUGH THE WATER PIPE, THE TELESCOPIC ROD
SHOULD BE IN A CONTRACTED STATE RATHER THAN AN EXTENDED STATE.
4. Connect the angle adjustment device to the top thread of the telescopic pole, then connect the brush to the direction adjuster, and finally adjust the angle
of the brush.
① After the installation,It is necessary to extend the pole section by section to the
②The expansion process should start from the innermost (smaller) section, and
the contraction process should start from the outermost (the thickest) section.
③ This product is applicable for cleaning outer window glass, tile walls,Glass
curtain wall,solar panel surface, LED screen, AD board AD wall , Indicators.It can
clean the dust, bird droppings and other attachments on the surface.
④ It will be more effective to rewash when you clean the strong attachments on
the surface, the first wash will soft the attachments.
⑤Store the water fed brush in a cool dry place to prevent premature aging of
components due to moisture and prolonged lighting.
Q:Why not extend pole fully,then lift to cleaning area?
A: The principle of leverage , when a tool is raised, the fulcrum of the lever is in the position
of the hand grip, so that the longer the pole extends, the greater force needed to lift the
pole. Therefore, leaning against the wall and extending the pole section by section to the
clean area is the most labor-saving way.
Maintenance and repair
① Product use/storage environment requirements.
The product is rust-proof but not corrosion-resistant. Therefore, please use the product in a salt-free
environment; the product storage environment requires a dry warehouse environment.
② Product placement example.
* P1 is the wrong way to place. This type of placement can cause the bristles to deform and affect the use of the product; therefore, we recommend placing the product in the same way as in P2.
We accept a variety of payment method including:
Direct Transfer, Credit Card, Paypal, Alipay, WeChatpay
We also accept installation payment from:
Zippay, Afterpay, Humm
If you have any requirements regarding the payment method, please let us know.